Duplex gear oil pumps for forklift applications


Release time:

2020-01-09

Gear pumps are rotary pumps that convey liquids or pressurize them based on the change and movement of the working volume formed between the pump cylinder and meshing gears. By two gears, pump body and front and rear cover composed of two closed space, when the gears rotate, the volume of the space on the side of the gear disengagement from small to large after the formation of a vacuum, the liquid will be sucked in, the volume of the space on the side of the gear mesh from large to small, and the liquid will be squeezed into the pipeline to go, suction chamber and discharge chamber is dependent on the meshing line of the two gears to be separated, the discharge pressure of the gear pump depends on the size of the resistance at the outlet of the pump. The discharge pressure of the gear pump all depends on the size of the resistance at the outlet of the pump.

Gear pumps are rotary pumps that convey liquids or pressurize them based on the change and movement of the working volume formed between the pump cylinder and meshing gears. By two gears, pump body and front and rear cover composed of two closed space, when the gears rotate, the volume of the space on the side of the gear disengagement from small to large after the formation of a vacuum, the liquid will be sucked in, the volume of the space on the side of the gear mesh from large to small, and the liquid will be squeezed into the pipeline to go, suction chamber and discharge chamber is dependent on the meshing line of the two gears to be separated, the discharge pressure of the gear pump depends on the size of the resistance at the outlet of the pump. The discharge pressure of the gear pump all depends on the size of the resistance at the outlet of the pump.

At present, the market of forklift trucks with double gear oil pumps can not be adjusted according to the need for single gear pumps to work alone or with double gear pumps work at the same time, and it is not convenient to connect to the pipeline, connection, because the rotation is easy to twist the pipeline to the pipeline clogging. Therefore, the relevant technical personnel provide a new forklift truck with double gear pump, in order to solve the problems raised in the above technology.

The double gear oil pump for forklift trucks includes a pump casing, an active rotary shaft, a screw and a rotary joint, an active gear is provided on the right side of the pump casing, and the active gear is rotationally connected to the pump casing through the active rotary shaft, the upper end of the active rotary shaft is threaded on the top of the pump casing, the left side of the active gear engages with a passive gear, and the passive gear is rotationally connected to the inner wall of the pump casing through the passive rotary shaft, and the lower end of the active rotary shaft is provided with a gear structure.

The forklift truck duplex gear pump can be rotated by running the rotating rod to drive the screw, thereby controlling the up and down sliding of the sliding block, thereby controlling the up and down sliding of the sliding sleeve, so that the 2nd gear structure and the gear structure are meshed and connected or separated, thereby regulating the forklift truck duplex gear pump to carry out double gear pumps, simultaneous work or single gear pumps to work alone, which is convenient for the user to regulate the use of the forklift according to the need to increase the applicability of the forklift truck. This increases the applicability of the forklift truck duplex gear oil pump.

Key words: